Hardware installation

    The Rebound! hardware connects to one of your computer's Apple Desktop Bus ("ADB") ports (as labelled with the symbol to the right) to communicate with the software. It also connects to your power receptacle to enable hardware restarting. Refer to the diagram below:

    1. Shut down your computer normally.
     
    2. Disconnect your keyboard cable from the ADB port on the back of your computer.
     
    3. Connect Rebound!'s short cable to the ADB port on the back of your computer (A).
     
    4. Connect your keyboard cable into Rebound! (B).
     
    5. Start up your computer normally.

    Note: Instructions on installing the software can be found in the Rebound! user manual on the Rebound! CD.

    After installing the hardware, you will need to enter your activator code to enable Rebound!'s features. This activator code can be found in your Rebound! packaging or, if you upgraded your Rebound! software on our web site, in your order confirmation e-mail.

Next topic